technical parameter:
Sensitivity: low sensitivity, normal sensitivity, high sensitivity and ultra-high sensitivity (can detect a single 12 # stapler) Alarm mode: vibration, sound, vibration and sound 3 alarm modes, the operator can judge the metal level of the detected object through the sound and light prompt, can be connected to external headphones
(1) Complete machine weight: 270g (excluding battery);
(2) Protection level: no less than IP53;
(3) Battery: the common model of battery should be used for power supply, the power supply voltage should not exceed 15V, it is required to use 2 no. 5 batteries, for replacement;
(4) Working time: it shall be able to work normally for at least 80h without replacing the battery or recharging, and the standby time shall be no less than 180 hours; Charging power saving function: The equipment shall have charging function, and the indicator light shall indicate when charging. The equipment shall have the power saving function, when the equipment is not used for more than 2 minutes, the equipment will enter the dormant state, in the dormant state for 10 minutes, the equipment will automatically wake up, in the dormant state for more than 10 minutes, the equipment will automatically shut down;
(5)) Operation and control device: the machine can be switched with one key; low, medium, high, ultra high 4 sensitivity adjustable, quick switch between each sensitivity, the headset can be connected to meet the needs of different environments;
(6) Radiation magnetic induction intensity: the radiation magnetic field emitted by the detector, its magnetic induction intensity should not exceed 8 μ T on its surface;
(7) Sensitivity range: should be able to fit or cover a detection level;
(8) Detection capability: Detection capability: 65mm;
(9) Continuous working stability: 80h;
(10) Alarm sound: alarm sound 80dB (A), the alarm sound should indicate that the sound of other information is different;
(11) Recovery of the alarm state: the detector has the ability to automatically recover the alarm state, and the alarm instruction shall stop immediately after leaving the specified distance of the alarm test object;
(12) Working temperature: shall work at-20 ± 2℃ for 2 hours and 55 ± 2℃ for 2 hours;
(13) Anti-mutual interference: multiple detectors are used 0.6m apart at the same time, and each can work normally;
(14) Resistance to the surrounding metal effect: the moving metal object outside 0.6m, should not make the detector mistakenly alarm, at the same time, the detector close to the large metal object, should be able to automatically restore its detection performance within 1min after leaving the large metal object;
(15) Black metal and ferrous metal and non-ferrous metal detection mode: the detector should have three detection modes;
(16) Mixed mode (both metals can alarm);
(17) Black metal detection mode (no alarm to non-ferrous metals). Material: shock resistant, shock resistant ABS plastic